Top 5 Best Plasma Cutter under $500 in 2017
To begin with a cutting job, there are few things that prevents us from the best possible outcome. You must understand these problems to overcome it and find a solution by buying a better product with advantages over those problems. Plasma cutters where more expensive until a few good guys decided to make it portable, with more accessories that will also work anywhere in the world, simply, the best plasma cutter under $500 which is smarter than most out there. Inverter cutting machines usually are efficient and consume less power on comparing with normal cutters.
Now take a look at the 5 best plasma cutter under $500 which have their own positives that will wipe away your past problems with plasma cutters.
5 Best Plasma Cutter for the Money
5. SUNGOLDPOWER 50A Air Plasma Cutter
SUNGOLDPOWER Air Plasma Inverter Cutter with digital display will be recommended as it comes with IGBT soft switch technology ( Insulated Gate Bi-polar Transistor ) which is an electronic switch transistor that consumes very less power since it switches almost instantly without any loss of power. The digital display on the front is easy to read and displays all the information such as the voltage, current and air – pressure. The current can be adjusted to enable faster and efficient cutting based on the type of material and their thickness. The in-built cicuitary to protect the device from over heating, high or low voltage and lack of air pressure promises to increase the life span of the device.
The transistor continously regulates the voltage and current to provide maximum efficiency with minimum power consumption. It works in both 110v and 220v so proves that they are more portable than other machines. The device is waterproof, with no noise. It also resists interference and provides stable current so that the cutting is done with ease and at maximum efficiency.
4. Lotos LTP5000D 50Amp Plasma Cutter
LOTOS LTP5000D Pilot Plasma Cutter comes next. It is a compact plasma cutter that is more efficient and uses only compressed air, which is non – hazardous to cut straight into the copper and aluminium. The torch in the pilot arc cuts through rough, painted and rusty surfaces while producing minimum slag. The MOSFET transistor produces uniform output throughout the cutting. This MOSFET also runs with dual voltage as it can run in wither 220v 50/60Hz power or on 110v 50/60Hz power.
The device has advanced PAPST German cooling system that enables hours of usage before the machine needs to be cooled down. The Non-touch pilot arc efficiently cuts to a maximum thickness of half an inch without any slag, which means, 1/2″ cuttings are cleaner while more thickness than that will not be impossible bu will be a severance cut. It uses the compressed air to cut stainless steel, alloy steel, mild steel, copper and aluminium.
3. Super Deal Plasma Cutter
SUPER DEALÂ is a cutting and welding machine which comes with an efficiency of 85% using a digital inverter technology. You will be getting more value for your money than anything else in the market since it ships with more accessories than the other products in the market which includes air pressure regulator, grounding clamp, 2 plasma tips, Cutting torch LG-40, Chipping hammer, Wire brush, Welding face mask, pressure reducing valve and a power card which can be attached to either 220v plug or a 110v plug.The pressure gauge will provide the information with the air pressure.
The Plasma cutter comes with a easy to read digital readout which enables easy viewing of the current that can be changed with a manual dial on the right. You’ll be impressed to see what this tiny portable machine can do as it wizzes right through the metal without any difficulty. This device can cut through an inch of metal thickness with ease and also provides a very clean cut. It also comes with Protection class : IP21S and Insulation class – F.
2. PRIMEWELD Premium Air Inverter Plasma Cutter
This plasma cutter is precision cutter with digital inverter that can clean cut upto 1/2″ metal. This plasma cutter can cut through Stainless steel, alloy steel, mild steel, copper aluminium and other metal materials with ease. The diversity between 110v and 220v makes sure that this device is truly portable. Designed by professionals, the arc cutter gets the job done as it comes with the MOSFET transistore which are far more reliable and efficient.
This machine requires less cleaning, less maintenance and less fire hazard. The plasma cutter works at a very high frequency thus getting deeper into materials is easier than other plasma cutters. See by yourself to believe what this 300$ Plasma cutter can do.
1. PrimeWeld Ct520d 50 Amps Plasma Cutter
This top rated plasma cutter is a multipurpose unit that offers multiple cutting and welding functions in a tiny little package. With just 32 lbs and maximum efficiency of 85% this welder and cutter can do more miracles than you think. It can weld metals as if it were a butter with ease. The consumables to this unit is cheaper. It is quite little than other unit and compact making it easier to port anywhere. The device comes with a state of the art MOSFET transistor which makes sure that the device goes through the complete duty cycle without over heating.
This would be a good buy for such a low cost since it packs multiple devices into one tiny package. The manual dial on the front lets you select the required voltage and current based on the material you’re about to cut.
Â Final Words
I have made it easier for you to select the best out of the devices out there which proves to be more economical, portable, efficient and gets you the job done. The above mentioned devices are available at a very low cost than most other devices and packs more efficiency than any other devices. Select the better for you from the above given best plasma cutter under $500 and Happy cutting!
Disclaimer: We check & update the list every month. Some product prices may have changed since our latest update.
Last Date of Update: 1st January, 2018