Jointers are usually expensive, and it’s quite difficult to find a good one at a very reasonable price.
After all, these are heavy-duty tools that generate a lot of power for woodworking, so it’s normal for them to be expensive.
However, what if we were to find amazing jointers for you at low costs? Because that’s exactly what we have done in this article.
Among our top five picks, you are sure to find the best jointer under 500 for your work. In fact, we have also included a buying guide, which will help you be more aware of what you should be looking for.
With all this information, finding a suitable jointer will only become a piece of cake for you. So, without further delay, let’s get started.
Top Jointer Under $500 – Comparison 2020
|1||CRAFTSMAN CMEW020 10 Amp Benchtop Jointer||34 Reviews||$322.00||Buy on Amazon|
|2||PORTER-CABLE PC160JT Variable Speed 6" Jointer||234 Reviews||$339.00 $319.99||Buy on Amazon|
|3||6" Bench Top Jointer 37-071||90 Reviews||$396.64||Buy on Amazon|
|4||WEN JT6561 10-Amp 6-Inch Corded Benchtop Jointer with Cast Iron Base||$326.98||Buy on Amazon|
|5||Shop Fox W1829 Benchtop Jointer, 6-Inch||52 Reviews||$361.00||Buy on Amazon|
Last update on 2020-05-24 / Affiliate links / Images from Amazon Product Advertising API
Best Jointer Under $500 – Review 2020
Looking for a great jointer but don’t know where to start? Fret not, we have done all the research for you and compiled the top 5 jointers in this list.
From there, you can choose whichever seems to be the most suitable for your work.
PORTER-CABLE PC160JT Variable Speed 6” Jointer
Do you have multiple workplaces and would like to get a jointer that can be transported easily? In that case, here’s a product that you should not miss out on. Along with that, it has multiple other features to offer that will only amaze you.
For different materials and thickness, a variety of speeds would be required. That is why, this jointer comes with a 6,000-11,000 RPM speed range, which allows the users to select the apt speed for the material being cut.
What makes the jointer even better is that it comes with a very convenient replacement process of the knives.
Thanks to its two knife cutter head along with jackscrew knife leveling arrangement, you can easily adjust them as well.
In fact, it comes with another feature that only makes the process easier. That is its built-in cutter headlock, which only facilitates the replacement and adjustment process.
Worried about not having enough space for your work? Fret no more. The large surface area of the work table will provide ample support and will allow you to work with materials that are about 6 inches wide.
For accurate edge jointing, you will need enough support. And, for that, the product comes with a center-mounted fence, which will be providing you with ample support while you are working.
However, the provided knives dull fast; as a result, you will need to replace them frequently, which can be both costly and time-consuming. Furthermore, the product does not contain any user-replaceable parts.
Related Guide: Best Shark Vacuum Under $200
6” Bench Top Jointer 37-071
If you are going to spend a considerable amount of money on a jointer, then you might as well make sure that it provides good value for money. Fortunately, here’s a product that does, and you are about to find out more about it.
First of all, this jointer will accompany you for quite a long time. With its heavy-duty cast iron construction, you won’t have to worry about replacing it anytime soon.
In fact, this particular aspect also ensures less vibration during work; while providing ample stability, thanks to its large weight.
Moreover, its fence system is also made of cast iron, which ensures accurate jointing as well.
On the other hand, the fence adjust system allows you to make stops at two different angles — one at 45 degrees and the other at 90 degrees. Hence, you can bring a lot of diversity into your work as well.
What makes the product even better is that it provides up to 1/8 inches of cutting depth. As a result, you will not face any trouble even if you cut thick and hard materials with it.
Furthermore, it is capable of making around 20,000 cuts per minute. While this speed will surely save a lot of your time, it will also ensure increased accuracy even when making the most detailed cuts.
Sadly, the instructions provided with the product are not very useful; therefore, you might face some trouble when using it.
Moreover, the wheel that controls the depth cut is actually very slow, which can be a little frustrating.
Grizzly Industrial G0725-6” x 28” Benchtop Jointer
If you have already heard of the brand, then you know that they are known for producing commendable products.
And of course, this one is no different from the rest and will stand up to all the expectations that you have from it.
The performance of a jointer depends on how powerful it really is. With its 1-1/2 HP motor, which comes with a voltage of 110V, you know that this will not disappoint even when you are working with your toughest materials.
On the other hand, to make sure the jointer itself is able to keep up with the power generated, it is made of cast iron.
As a result, no matter how rough the work gets, you won’t have to worry about the table getting damaged.
What makes it even better is that, with the table’s large surface area, you can conveniently execute your big projects.
It comes with a size of 28-1/2” x 6-1/4”, which will also allow you to work comfortably at all times.
But that’s not all. It also includes a 22-7/8” x 4-1/4” fence, which will provide the support needed for accurate joining. Therefore, you will be able to make accurate cuts even on your detailed projects.
One of the biggest disadvantages of such work is that it can get quite messy due to all the dust generated. However, with the built-in dust collection system of this jointer, that is not something you will have to worry about.
However, the blade locking screws that come with it can easily become overtightened, which can cause them to become stripped.
On the other hand, the table bed and the fence are not flat, which is quite disappointing.
RIKON Power Tools 20-600H 6″ Benchtop Jointer
One of the essential aspects when it comes to jointers is accuracy. If the product does not offer 100% accuracy, then it’s not worth the purchase. Fortunately, here’s a product that does, along with a lot more amazing features.
When it comes to delivering optimal power and speed, this jointer doesn’t really falter. With its 10 AMP motor, the product will perform well even if you are working with tough and thick material.
Along with that, the jointer comes with a 30”x6-3/16” table allowing you to work comfortably even with a large project.You can conveniently join edges of big materials without any hassle whatsoever.
Furthermore, to keep up with the power of the motor, it comes with all-steel construction, which is not only rigid but also resists rust and corrosion. Hence, you don’t have to worry about replacing it anytime soon.
For accurate edge joining, you will surely need enough support from the fence provided. The fence of this jointer not only provides the necessary support but also tilts from 45 degrees to 90 degrees accurately.
But that’s not all. The product has been made, keeping your safety in mind as well. That is why it comes with a spring-loaded safety guard, along with a front on and off switch.
However, the table is not machined perfectly smooth, which makes it collect dust much more easily. On the other hand, it often gets difficult to adjust the fence, which can get quite frustrating for the users.
Shop Fox W1829 Benchtop Jointer
Are you looking for a jointer that will provide not only top-notch accuracy but also portability? In that case, you have just stumbled across the perfect product for yourself. Find out more about why this tool is known as the best jointer for under 500 dollars.
The performance of a jointer depends on how powerful it really is. With its 1-1/2 HP motor, which comes with a voltage of 110V, you know that this will not disappoint you even when you are working with tough and thick materials.
On the other hand, the product comes with commendable speed, which not only saves its users time but also lets them work with hard materials.
With a speed of 10,000 RPM and 20,000 cuts per minute, you can execute your projects quickly.We all prefer clean cuts when it comes to woodworking.
Therefore, this product has been made in such a way that it will ensure clean and accurate cuts at all times, thanks to its two-knife HSS cutter head.
What makes the tool even better is that it comes with a 2-1/2 inch dust port, which keeps the work area clean and free of dust. As a result, you won’t have to get frustrated by all the dust getting in your way of work.
Furthermore, for security, the machine comes with a pair of safety push blocks. Hence, you won’t have to worry about unwanted accidents taking place in the middle of your work.
However, the fence is made of aluminum instead of cast iron, which makes it quite difficult to adjust. Furthermore, the motor casing is quite fragile, so it might break down if you are working for too long.
Things to Consider Before Buying
There are surely a lot of factors that go through your mind before you buy a tool- whether it is for your profession or your hobby. And so should be the case while you are looking for an apt jointer under 500 dollars.
Finding a suitable one is no easy task, and you are sure to end up with the wrong tool if you aren’t careful enough. So, we have made a list of all the essential factors that you should adhere to.
The motor power of a planer determines its overall performance and operation. If you end up choosing a tool that doesn’t offer enough power, then you will struggle with a lot of tough projects.
To ensure that does not happen, choose a jointer that comes with a 12-15 AMP motor. Anything less than that will not generate the power needed to work with hard materials.
This aspect determines how neat and smooth your cuts are going to be. With higher cutter speed, you will surely get better finishes, but the question is, what speed is optimum? You will find most jointers under $1000 dollars offer a cutter speed of around 5,000-10,000 RPM.
If the speed happens to be lower than that, then you shouldn’t simply go for that tool as it will not provide the neat cuts that you are looking for.
Infeed and Outfeed Tables
There are three factors that you need to focus on when it comes to feeding tables- their length, their width, and the material used to make them. While the first two depend on your projects, the last one should be similar in every case.
For instance, the material used to make them should be sturdy. Otherwise, they might fall apart due to the enormous power being generated. However, the length and width should depend on the size of your usual tasks.
Jointers come with very shallow cutting depth, which usually requires the tool to make a few passes to produce flat sides. In this case, you will be looking for depths that are between 1/8 to 3/8 inches.
You can’t simply increase the depth, as that might end up giving the board warped sides — which you obviously wouldn’t want. So, there’s not much an option for you to choose from in this case.
Frequently Asked Questions
If you need to smooth the top of 1-2 objects, then you don’t really need a jointer. You can easily use a belt sander or a hand plane.
However, if joining is your profession or if it’s something you tend to do frequently, then you should get one.
The main task of a jointer is to produce flat edges on boards before joining them edge-to-edge. This, in turn, produces wider boards.
There is a type of a hand plane called the jointer plane, which is where this machine gets its name from.
Yes. Planers can’t do what a jointer does, so it’s practically impossible for you to use them interchangeably.
However, if you don’t want to buy two of these, then you can buy a two-in-one jointer and planer for more convenience.
Technically any heavy-duty woodworking machine is unsafe if you aren’t careful enough. However, these tools do come with safety features and locks, which reduces the possibility of unwanted accidents occurring.
Yes. If you get a fence for your table saw, then you can use it as a jointer, especially when working with plywood. That is because table saws include carbide blades that work quite well with plywood.
While there are some amazing jointers available under 500 dollars, not all of them can be trusted.
Therefore, you should be cautious when choosing one, because you surely don’t want to end up with the wrong product.
With some patience and all the information provided, you will find the best jointer under 500 in no time.